EDHM18S系列高性能伺服开云(中国)有限公司

产品介绍：

■机床整体架构采用龙门式结构，确保了机床的高刚性和高稳定性。

■机床底座采用分离式水箱设计，方便用户清理冷却液沉淀物质。

■主轴往复和旋转运动采用高性能伺服电机控制，速度可实现同步控制，响应速度快。

■珩磨砂条涨缩装置为双进给结构，采用伺服电机和液压比例控制技术实现压力闭环控制。

■机床工作台采用高精度双工位液压回转工作台，单轴双工位模式，工作辅助时间为零。

■采用伦茨高性能运动控制器，运行稳定可靠。

■集成操作平台，配置TFT彩色液晶触控面板。专为珩磨加工定制的人机界面更具人性化。

■集中润滑系统间歇供油，延长滑动部件使用寿命。

■ Gantry frame of machine ensures high rigidity and stability. The high quality grey cast iron base has good vibration absorbing ability.

■ Machine base using separate water tank design, user-friendly coolant clean up sediment.

■ The reciprocating and rotating movement of the main shaft is controlled by a high-performance servo motor. The speed can be synchronously controlled and the response speed is fast.

■ Honing extension system is in double-feed design, Adopt servo motor and hydraulic proportional control technology to realize pressure closed-loop control.

■ The machine table is duplex hydraulic rotary table, single axis duplex position mode, the work auxiliary time is zero.

■ The machine is controlled by LENZE high-performance motion controller, stable and reliable operation.

■ Integrated platform, with TFT liquid crystal color touch panel. The human-machine interface especially made for honing shows humanistic feature.

■ Intermittent oil lubrication system, to extend the service life of the sliding member.

■控制系统采用伦茨LENZE基于控制器自动化的P500高性能控制器，控制器集成可视化、运动控制、逻辑编程功能，配置10.4“彩色TFT人机界面。

■The control system adopts Lenze LENZE P500 high-performance controller based on controller automation. The controller integrates visualization, motion control, logic programming functions, and is equipped with a 10.4" color TFT man-machine interface.

■机床冷却系统为循环冷却，采用双油箱设计，磁分式纸带过滤机两级过滤,并使用油冷机强制冷却。

■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.

■机床夹具采用上下移动式胶套包容夹具结构，具有失压保护检测装置，也可订制油缸压紧结构式夹具等。

■Up and down moving chucking with inclusive rubber sleeve has voltage loss protection and detection function. Cylinder compressed type of chucking or other tailor-made types may be used.

■机床配置东京计量在线自动测量系统以保证珩磨工件尺寸一致性。

■ Machine configuration online automatic measuring system from Tokyo Seimistu ACCRETECH to ensure honing workpiece size consistency.

■主轴往复采用伦茨高性能伺服电机驱动，具有良好的动态响应性能。

■ The spindle reciprocating is driven by Lenze high-performance servo motor, which has good dynamic response performance.

■主轴旋转采用伦茨高性能伺服电机驱动，与主轴实现同步控制。

■ The spindle rotation is driven by Lenze's high-performance servo motor, which realizes synchronous control with the spindle reciprocating.

■EtherCAT总线技术

■ EtherCAT bus technology

EDHM18S系列高性价比伺服开云(中国)有限公司 规格参数